เครื่องเชื่อม TOPWELL mig 200 PROMIG-200SYN
- แบบ
- PROMIG-200SYN
คุณสมบัติ
- แรงดันไฟฟ้าอินพุตที่กำหนด
- 1PH ~ 230V ± 15%
- ความจุไฟฟ้า MAX.Load
- 8.75KVA
- จัดอันดับการส่งออก
- 200A / 24V
- แรงดันไฟฟ้าวงจรเปิด
- 70V-80V
- effiency
- 80%
- กลไกการป้อนลวด
- 2 ลูกกลิ้ง
- ช่วงความเร็วในการป้อนลวด
- 2-18 เมตร / นาที
- การประกัน
- รับประกัน 3 ปี
- มิติ
- 540x230x480mm
- น้ำหนัก (กิโลกรัม)
- 20 กิโลกรัม
ประเมินผล
รายละเอียดสินค้า
-
PROMIG-200SYN
Versatile and synergy tool for the portable welder
-
Application:
Metal Fabrication
Maintenance and Repair
Auto Body
Light Industrial -
Processes:
MIG/MAG,
Flux-Cored
TIG, MMA(Stick) -
Input Power: 230V, 1-Phase
Rated Output at 40°C (104°F):
200A /24V/60% Duty Cycle
Weight: 20KG
True Synergy with JOB-LISTS
With thousands of welding jobs, we built the True Synergy with JOB-LISTS. It covers different metal materials, different wire diameters and different shield gases. After setting wire feeding amperage regarding to the wire feeding guide, the PROMIG-200SYN/200SYN Pulse will automatically match the best waveform to make your welding comfortable and excellent!
1. Select Job-list number
2. Set wire feeding amperage 3. Start welding and PROMIG does the rest
Pulse MIG for welding mild steel, stainless steel and aluminum
model Mild steel Stainless steel Aluminum Wire deer
(steel)Wire dear
(aluminum)Concept of metal plate PROMIG-200SYN ✓ 0.6/0.8/1.0 ≧2MM PROMIG-200SYN Pulse ✓ ✓ ✓ 0.6/0.8/1.0 0.8/1.0/1.2 ≧2MM We all understand using the short-circuit transfer type for welding mild steel. But TOPWELL PROMIG-200SYN PULSE uses spray arc transfer type (Pulsed MIG process) for all kinds of metals: stainless steel, aluminum and even mild steel! At this level, nobody in the world use the spray arc transfer type for welding mild steel, even the LINCOLN and ESAB. Because they only used it for the industrial models.
The peak current of PROMIG-200SYN/200SYN PULSE is up to 400Amps. Because of such a high peak current, it has enough energy to melt the wire during spray arc transfer. The real spray arc transfer forms droplet of molten metal at the end of the electrode, then just the right amount of current is added to push that droplet across the arc and into the puddle. With practicing thousands of welding jobs, the pulse curve is improved for different materials and different situations.
The 400Amps super high peak amperage could also confirm enough energy for welding mild steel with short-circuit transfer type. It could comfortably weld the 1.0mm wires (0.040in) while all the competitors’ machines only suitable for 0.6/0.8mm steel wires.
TOP FEATURES：
The True Multi-process welder will performs MIG/MAG with solid or flux-cored wire, stick and TIG like it was born to run that process.
Synergy with JOB-LISTS covers different metal materials, different wire diameters and different shield gases, easily welds mild steel, stainless steel and aluminum..
Built-in featured waveform constantly monitors complex arc characteristics adapting to your technique to provide a smooth, stable arc and superior, repeatable welds..
Dynamic Control controls the welding arc cone width, a slightly softer arc or a slightly harder arc depends on your preference and application..
Produces less spatter..
True high deposition rate..
2T or 4T selection..
Spot welding function..
-
-
Item No PROMIG-200SYN Rated Input Voltage 1PH ~ 230V ±15% Max. Load Power Capacity 8.75KVA Rated Duty Cycle(40℃) 60% MIG: 200A/24V MMA: 200A/28V TIG: 200A/18V 100% MIG: 160A/22V MMA: 160A/26.4V TIG: 160A/16.4V Welding Current/Voltage Range MIG: 10A/14.5V ~200A/24V MMA: 20A/20.8V~200A/28V TIG: 5A/10.2V~200A/18V Open Circuit Voltage 70V~80V Power Factor 0.8 Efficiency 80% Pre-Gas Time Preset Flow-Gas Time Preset Wire-feed Mechanism 2 Rollers Wire-feed Speed Range 2~18 m/min Wire Spool Capacity 200mm (5kg) Filler Wires (mm) for Fe : 0.6~1.0 mm Dimension 540x230x480mm Weight 20KG - For Standard accessories
MIG torch:MIG-24
Electrode holder with cable 2M
Earth clamp with cable 2MFor Optional accessories
BINZEL MB EVO PRO 24
Argon gas regular
or co 2 gas regular with heater
Push-pull Troch:
QTLB-24KD/36KD
TIG torch:TIG-26
Spool gun:QLBF-200/8M
-
-
Q:Are you a factory or a trading company?
A: We are factory with more than 10 years manufacturing experience and we provide perfect OEM and after-sale service.
Q:How can I pay my order?
A: We accept T/T, Western Union, Alibaba Trade Assurance payments. For those orders less than 1000USD, we accept PayPal to pay.
Q:How about your warranty?
A: We offer 3-year product life guarantee ,and a generous 1 year warranty on al purchases that begins with the bill of lading.
Q: Do you have a CE certificate?
A: For every model of machine, it has a CE certificate.
Q:How can I get the quotation?
A: We usually quote within 24 hours after we get your inquiry. If you are urgent to get the price,please send the message on trade management or call us directly
