วงจรการทำงานสูง 350amp สองจังหวะ mig ALUMIG-350CP
วงจรการทำงานสูง 350amp สองจังหวะ mig ALUMIG-350CP
วงจรการทำงานสูง 350amp สองจังหวะ mig ALUMIG-350CP
วงจรการทำงานสูง 350amp สองจังหวะ mig ALUMIG-350CP
วงจรการทำงานสูง 350amp สองจังหวะ mig ALUMIG-350CP
วงจรการทำงานสูง 350amp สองจังหวะ mig ALUMIG-350CP
แบบ
ALUMIG-350CP

คุณสมบัติ

แรงดันไฟฟ้าอินพุตที่กำหนด
3PH ~ 400V + 15%
ความจุไฟฟ้า MAX.Load
15.26KVA
จัดอันดับการส่งออก
350A / 31.5V
แรงดันไฟฟ้าที่เปิดวงจรสูงสุด
70V ~ 80V
effiency
85%
กลไกการป้อนลวด
4 ลูกกลิ้ง
ช่วงความเร็วในการป้อนลวด
0-25m / นาที
การประกัน
รับประกัน 1 ปี
มิติ
960x420x1400mm
น้ำหนัก
80kg

ประเมินผล

รายละเอียดสินค้า

  • ALUMIG-350CP

    Synergic, Pulse MIG and Double Pulse MIG

    • Application:

      Metal fabrication workshops
      Shipyards and offshore industry
      Chemical and process industry
      Steel structure workshops
    • Processes:

      MIG
      Flux-Cored
      Pulse MIG
      Double Pulse MIG
      MMA(Stick)
    • Input Power: 400V, 3-Phase

      Amperage Range: 10-350A
      Rated Output at 40°C (104°F):
      350A at 31.5V @60% Duty Cycle
      Weight:80KG

       

    SYNERGY MIG

    The synergic operation of the machine makes it easy to use, even for the beginning welder. Simply set wire type and diameter, then choose a wire speed. Now you’re off to weld! As wire speed increases/decreases, the arc voltage also increases/decreases to maintain a constant welding arc.

    PULSE MIG

    The Pulsed MIG process works by forming one droplet of molten metal at the end of the electrode per pulse. Then, just the right amount of current is added to push that one droplet across the arc and into the puddle. The transfer of these droplets occurs through the arc, one droplet per pulse.

    Advantage:

    • Absent or very low levels of spatter.
    • More resistant to lack of fusion defects than other modes of GMAW metal transfer.
    • Excellent weld bead appearance.
    • Reduced levels of heat induced distortion.
    • Ability to weld out-of-position.
    • Lower hydrogen deposit.
    • Reduces the tendency for arc blow.
    • Lends itself to robotic and hard automation applications.

    double Pulse MIG

    Using Waveform Control Technology, the welding machine alternates between high and low energy pulses. This combination of high and low pulses produces the "rippled" bead appearance. The high energy pulses provide a hotter arc (longer arc duration), which improves cleaning action at the base material. The low energy pulses allow the weld puddle to cool, which controls the heat input for good penetration.

    Advantage:

    • Minimal distortion, even when gap conditions and wire placement vary.
    • Outstanding control of arc characteristics, making it easier to produce excellent welds.
    • Rippled bead appearance requires no weaving to produce a uniform bead.
    • Controls the arc length and heat input together for excellent penetration profile.
    • Controls the arc heat, making it ideal for welding thinner materials.

    General View of Control Panel

    1.SELECT the Memory channel

    2.OPEN the parameter of selected memory channel

    3.STORE the setting to Memory channel

    4. Push to Check Gas

    5.STORE Push to use Synergic Setting

    6.Welding parameter setting,rotary dial
    Adjudtment of the welding current or feeding speed.

    7.Torch Holding Mode Push to select the torch handing type:

    1)2T 2)4T 3)S4:for aluminiu welding form cold to hot situation.

    8.Welding Process Push to select:

    Welding prcess:MMA,MIG/MAG/CO2,Pulse MIG,

    Double Pulse MIG.

    9.Dia. of Welding Wire

    10.Wire Type

    11.button,throttling effect(arc dynamics)

    12.Function Sequence

    13.Welding Settings


       

  • Item No ALUMIG-350CP
    Rated Input Voltage 3PH ~ 400V ±15%
    Max. Load Power Capacity 15.26KVA
    Rated Duty Cycle(40) 60% 350A/31.5V
      350A/34V
    100% MIG: 300A/29V
      MMA: 300A/32V
    Welding Current/Voltage Range MIG: 10A/14.5V~350A/31.5V
      MMA:10A/20.4V~350A/34V
    Open Circuit Voltage 70~80V
    Power Factor 0.85
    Efficiency 85%
    Pre-Gas Time 0-15S
    Flow-Gas Time 0-15S
    Wire-feed Mechanism 4 Rollers
    Wire-feed Speed Range 0~25 m/min
    Wire Spool Capacity 300mm (15kg)
    Filler Wires Ø (mm) Fe, Ss: 0.6~1.6 mm
    FLUX CORED: 0.8~1.6 mm
    Al: 1.0~1.6mm
    Dimension 960X420X1400mm
    Weight 80KG
    Water-cooling Unit: WC-150
    Operating Voltage 230V 50/60Hz
    Rated Power 260W
    Cooling Power 1.5KW(1L/MIN)
    Maximum Pressure 0.3MPA/60HZ
    Recommended Cooling Liquid 20%~40% ethanol/water
    Tank Volume 6.5L
  • For Standard accessories
    3

      

      

    MIG torch:MIG-24


      

      

    Earth clamp

    For Optional accessories
    3

      

      

    BINZEL MB EVO PRO 501D


      

      

    Argon gas regular
    or co 2 gas regular with heater

     

      

      


  • Q:Are you a factory or a trading company?

    A: We are factory with more than 10 years manufacturing experience and we provide perfect OEM and after-sale service.

    Q:How can I pay my order?

    A: We accept T/T, Western Union, Alibaba Trade Assurance payments. For those orders less than 1000USD, we accept PayPal to pay.

    Q:How about your warranty?

    A: We offer 3-year product life guarantee ,and a generous 1 year warranty on al purchases that begins with the bill of lading.

    Q: Do you have a CE certificate?

    A: For every model of machine, it has a CE certificate.

    Q:How can I get the quotation?

    A: We usually quote within 24 hours after we get your inquiry. If you are urgent to get the price,please send the message on trade management or call us directly

  •                     

แนะนำ